Attachments for a Caterpillar 326
A Caterpillar 326 is a 61,700 lb (28 t) excavator, which puts it in the 25–36 t large class. It takes 90 mm bucket pins on a pin-on stick. 1 attachments in the Quarrymark range fit a Caterpillar 326: 1 thumb. None is graded a direct fit yet, but 1 needs a mounting detail confirmed before it ships. Prices start at $9,403.20.
Caterpillar 326
| Operating weight | 61,700 lb · 28 t |
|---|---|
| Weight class | 25–36 t · large |
| Bucket pin diameter | 90 mm |
| Coupler / interface | Pin-on |
| Machine type | Excavator |
| Attachments that fit | 1 (0 direct fit) |
Operating weight is from the manufacturer’s published spec sheet. Pin diameter and coupler style are derived from that weight against our own tonnage bands. They are the right starting point for a machine in this class, not a statement about your specific unit. Verify both against your OEM spec, or send us a photo of the stick end and we will confirm it before you order.
1 attachments for a 326
We grade the fit rather than answer yes or no. Direct fit means the weight class and the mounting both check out. Fits your class means the attachment is rated for a machine of this weight and mounts pin-on. Verify first means something, usually the pin diameter, needs confirming before it ships. Telling a contractor a bucket fits when it does not is how you earn a freight claim.
Everything that fits a Caterpillar 326
Buying attachments for a Caterpillar 326
What size bucket fits a Caterpillar 326?
We do not currently list a width-sized bucket rated for a Caterpillar 326 at 28 t. Call (704) 555-0140 with the machine's operating weight and stick-end dimensions and we will size one from the class either side of it.
What pin size does a Caterpillar 326 use?
A Caterpillar 326 in the 28 t class typically runs 90 mm bucket pins on a pin-on connection. That is the number to check first, because it is the one that stops a bucket going on: the weight class tells you whether the machine can lift the attachment, the pin diameter tells you whether it will physically pin up. 1 of the 1 attachments listed here are the right weight class but drilled for a different pin. They are flagged "check pin size", and a bushing kit or a quick coupler resolves them. Pin diameter is derived from the machine's operating weight against our own tonnage bands, so measure yours or send us a photo of the stick end before ordering.
Can I run a hydraulic hammer on a Caterpillar 326?
Not from the models listed here. None of our current hammers is rated for a 28 t excavator. Call (704) 555-0140 with your auxiliary flow and relief pressure and we will tell you what is available in this class.
Will a quick coupler fit a Caterpillar 326?
We do not currently list a coupler rated for a 28 t machine in this catalog. Tell us the machine's stick-end pin centres and we will source one. Call (704) 555-0140.
