Free freight on orders over $750In stock & shipping nationwide from Charlotte, NC
Machine Match(704) 555-0140
Top Offers20 percent off buckets, thumbs, couplers, grapples, hammers and rakes.See the offers →
Mini Excavator · 2–4 t · mini

Attachments for a John Deere 35G

A John Deere 35G is a 8,135 lb (3.69 t) mini excavator, which puts it in the 2–4 t mini class. It takes 38 mm bucket pins on a wedge lock stick. 20 attachments in the Quarrymark range fit a John Deere 35G: 8 digging buckets, 4 trenching buckets, 3 rakes, 2 hydraulic hammers and 2 post driver hammers, plus 1 skeleton bucket. 5 of those are a direct fit: right weight class, right pin diameter. Prices start at $1,035.20.

See all 20 that fitCheck a fit: (704) 555-0140
Machine spec

John Deere 35G

Operating weight8,135 lb · 3.69 t
Weight class2–4 t · mini
Bucket pin diameter38 mm
Coupler / interfaceWedge Lock
Machine typeMini Excavator
Attachments that fit20 (5 direct fit)

Operating weight is from the manufacturer’s published spec sheet. Pin diameter and coupler style are derived from that weight against our own tonnage bands. They are the right starting point for a machine in this class, not a statement about your specific unit. Verify both against your OEM spec, or send us a photo of the stick end and we will confirm it before you order.

What fits, by category

20 attachments for a 35G

5 direct fit3 fits your class12 verify first

We grade the fit rather than answer yes or no. Direct fit means the weight class and the mounting both check out. Fits your class means the attachment is rated for a machine of this weight and mounts pin-on. Verify first means something, usually the pin diameter, needs confirming before it ships. Telling a contractor a bucket fits when it does not is how you earn a freight claim.

Compatible attachments

Everything that fits a John Deere 35G

Digging Buckets for a 35G

8 digging buckets
Ridgeline 24" Digging Bucket, 3–4.5 tFits your class
Digging BucketsRidgeline 24" Digging Bucket, 3–4.5 tRated for 3–4.5 t, which covers a John Deere 35G at 3.69 t.$1,954View
Ridgeline 30" Digging Bucket, 3–4.5 tFits your class
Digging BucketsRidgeline 30" Digging Bucket, 3–4.5 tRated for 3–4.5 t, which covers a John Deere 35G at 3.69 t.$2,254View
Ridgeline 18" Digging Bucket, 4–5 t · 40 mm pinsBorderline
Digging BucketsRidgeline 18" Digging Bucket, 4–5 t · 40 mm pinsRated for 4–5 t, so your 35G at 3.69 t sits just outside. Usable on light duty, but confirm with us first.$1,699View
Ridgeline 18" Digging Bucket, John Deere Wedge Lock · 4–8.5 tBorderline
Digging BucketsRidgeline 18" Digging Bucket, John Deere Wedge Lock · 4–8.5 tRated for 4–8.5 t, so your 35G at 3.69 t sits just outside. Usable on light duty, but confirm with us first.$2,064View
Ridgeline 24" Digging Bucket, 4–6 t · 45 mm pinsBorderline
Digging BucketsRidgeline 24" Digging Bucket, 4–6 t · 45 mm pinsRated for 4–6 t, so your 35G at 3.69 t sits just outside. Usable on light duty, but confirm with us first.$2,094View
Ridgeline 24" Digging Bucket, 4–6.5 t · 45 mm pinsBorderline
Digging BucketsRidgeline 24" Digging Bucket, 4–6.5 t · 45 mm pinsRated for 4–6.5 t, so your 35G at 3.69 t sits just outside. Usable on light duty, but confirm with us first.$2,184View
Ridgeline 30" Digging Bucket, 4–5 t · 45 mm pinsBorderline
Digging BucketsRidgeline 30" Digging Bucket, 4–5 t · 45 mm pinsRated for 4–5 t, so your 35G at 3.69 t sits just outside. Usable on light duty, but confirm with us first.$2,374View
Ridgeline 30" Digging Bucket, 4–6.5 t · 45 mm pinsBorderline
Digging BucketsRidgeline 30" Digging Bucket, 4–6.5 t · 45 mm pinsRated for 4–6.5 t, so your 35G at 3.69 t sits just outside. Usable on light duty, but confirm with us first.$2,389View

Post Driver Hammers for a 35G

2 post driver hammers
Fencepost 500 J Post Driver Hammer, 3–6.5 tFits your class
Post Driver HammersFencepost 500 J Post Driver Hammer, 3–6.5 tRated for 3–6.5 t, which covers a John Deere 35G at 3.69 t.$2,654View
Fencepost 350 J Post Driver Hammer, 1–4.5 t · 35 mm pinsCheck pin size
Post Driver HammersFencepost 350 J Post Driver Hammer, 1–4.5 t · 35 mm pinsWeight class is right for a John Deere 35G, but this is drilled for 35 mm pins and yours are typically 38 mm. A bushing kit or a coupler solves it, so confirm before ordering.$2,429View
35G questions

Buying attachments for a John Deere 35G

What size bucket fits a John Deere 35G?

Buckets from 6" up to 48" wide are rated for a John Deere 35G. The widths we stock in this class are 6", 12", 18", 24", 30", 48". On a 3.69 t machine the narrow end of that range is the trenching and utility-line width, and the widest sizes are for grading and cleanup, where you are moving loose material rather than breaking ground. Go wider than the machine's rated capacity and you will feel it as lost breakout force and a tippy load at full reach, not as a fitment problem.

What pin size does a John Deere 35G use?

A John Deere 35G in the 3.69 t class typically runs 38 mm bucket pins on a wedge lock connection. That is the number to check first, because it is the one that stops a bucket going on: the weight class tells you whether the machine can lift the attachment, the pin diameter tells you whether it will physically pin up. 12 of the 20 attachments listed here are the right weight class but drilled for a different pin. They are flagged "check pin size", and a bushing kit or a quick coupler resolves them. Pin diameter is derived from the machine's operating weight against our own tonnage bands, so measure yours or send us a photo of the stick end before ordering.

Can I run a hydraulic hammer on a John Deere 35G?

Yes. 4 of our hammers are rated for a machine this size. They run 350–1,018 joules of impact energy, which is the range a 3.69 t carrier can actually feed. The constraint is hydraulic, not structural: the machine needs an auxiliary circuit with the flow and relief pressure the hammer is specified for, and a machine plumbed only for a thumb will not run a breaker without the second circuit. Check your auxiliary flow on the machine's spec plate, or send it to us and we will match the hammer to it.

Will a quick coupler fit a John Deere 35G?

We do not currently list a coupler rated for a 3.69 t machine in this catalog. Tell us the machine's stick-end pin centres and we will source one. Call (704) 555-0140.

Different machine?

Sizes either side of the 35G

One size downJohn Deere 30G3.13 t · 38 mm pin12 attachments fit →One size upJohn Deere 50G4.99 t · 45 mm pin18 attachments fit →Not sure?Machine MatchPick any make and model and we will list what fits it.Open the tool →

Other John Deere machines

17G1.76 t26G2.7 t30G3.13 t50G4.99 t60G5.94 t85G8.53 t135G13.8 t210G22.5 t350G36.3 t
Request a quote for a 35GAll John Deere models
Quarrymark Attachments is a WorkspaceCMS demo store. The brand, products and prices are invented for the demonstration, and the catalog, cart and checkout run on BigCommerce. No order placed here is real or will ship.
Website by WorkspaceCMS.ai