Attachments for a Bobcat S64
A Bobcat S64 is a 7,124 lb (3.23 t) skid steer, which puts it in the 2–4 t class. It mounts attachments through a Bob-Tach interface rather than bucket pins. 8 attachments in the Quarrymark range fit a Bobcat S64: 3 digging buckets, 2 post driver hammers, 1 quick coupler, 1 rake and 1 trenching bucket. None is graded a direct fit yet, but 6 are rated for this weight class and 2 need a mounting detail confirmed before they ship. Prices start at $1,035.20.
Bobcat S64
| Operating weight | 7,124 lb · 3.23 t |
|---|---|
| Weight class | 2–4 t · mini |
| Bucket pin diameter | N/A (quick-attach carrier) |
| Coupler / interface | Bob-Tach |
| Machine type | Skid Steer |
| Attachments that fit | 8 (0 direct fit) |
Operating weight is from the manufacturer’s published spec sheet. Pin diameter and coupler style are derived from that weight against our own tonnage bands. They are the right starting point for a machine in this class, not a statement about your specific unit. Verify both against your OEM spec, or send us a photo of the stick end and we will confirm it before you order.
8 attachments for a S64
We grade the fit rather than answer yes or no. Direct fit means the weight class and the mounting both check out. Fits your class means the attachment is rated for a machine of this weight and mounts pin-on. Verify first means something, usually the pin diameter, needs confirming before it ships. Telling a contractor a bucket fits when it does not is how you earn a freight claim.
Everything that fits a Bobcat S64
Digging Buckets for a S64
3 digging buckets
Fits your class
Fits your class
BorderlinePost Driver Hammers for a S64
2 post driver hammers
Quick Couplers for a S64
1 quick coupler
Rakes for a S64
1 rake
Trenching Buckets for a S64
1 trenching bucket
Buying attachments for a Bobcat S64
What size bucket fits a Bobcat S64?
Buckets from 12" up to 30" wide are rated for a Bobcat S64. The widths we stock in this class are 12", 24", 30". On a 3.23 t machine the narrow end of that range is the trenching and utility-line width, and the widest sizes are for grading and cleanup, where you are moving loose material rather than breaking ground. Go wider than the machine's rated capacity and you will feel it as lost breakout force and a tippy load at full reach, not as a fitment problem.
How do attachments mount to a Bobcat S64?
A Bobcat S64 mounts through a Bob-Tach interface, not bucket pins. Any attachment built to that standard drops on without measuring pin diameter, which is why the fit grading on this page keys on the coupler and the machine's 3.23 t operating weight instead.
Can I run a hydraulic hammer on a Bobcat S64?
Yes. 2 of our hammers are rated for a machine this size. They run 350–500 joules of impact energy, which is the range a 3.23 t carrier can actually feed. The constraint is hydraulic, not structural: the machine needs an auxiliary circuit with the flow and relief pressure the hammer is specified for, and a machine plumbed only for a thumb will not run a breaker without the second circuit. Check your auxiliary flow on the machine's spec plate, or send it to us and we will match the hammer to it.
Will a quick coupler fit a Bobcat S64?
Yes. 1 coupler in our range is rated for a machine at 3.23 t. A coupler is the single best purchase on a 3.23 t machine that changes attachments more than once a day: it turns a twenty-minute pin-and-hammer job into a thirty-second swap from the seat, and it decouples you from the mounting standard so you can buy attachments on price and spec instead of on drilling. Free freight applies over $750.
